To set up call conversion tracking in Google Ads, open Goals, then Summary, select + Create conversion action, tick “Conversions from phone calls” and choose calls from ads, calls from website or calls via uploads. Turn on call reporting, set a minimum call length, and add the Google tag and phone snippet for website calls. To count only qualified calls, send them from a call tracking tool.

This is the how-to. If you want the background first (what Google can and cannot measure, and how forwarding numbers work), read what Google Ads call tracking is, then come back here for the steps. Both sit inside our wider guide to PPC call tracking.

Google’s menu names below were checked against Google Ads Help on 16 November 2026.

Which call conversion should you set up?

Google’s page on phone call conversion tracking lists the ways to count a call. Four of them need a setup from you:

Conversion type What it counts What you need
Calls from ads Calls of a set length Call asset
Website number Calls after an ad click Tag + phone snippet
Mobile site clicks Taps on the number Tag + click event
Imported calls Calls you choose Upload or tool

Google lists a fifth, clicks on call ads and assets, which counts a click without a forwarding number when Google estimates a meaningful call followed. There is little to configure, so this guide covers the other four.

Most accounts need two: calls from ads for people who call straight from the search result, and calls to a number on your website for people who click through first.

Before you start: turn on call reporting

Calls from ads, website calls and imported calls all rely on Google forwarding numbers, and those only work with call reporting on. Google’s steps for managing call reporting are:

  1. Open Account settings in the Admin menu.
  2. Under Call reporting, select On.
  3. Select Save.

The setting is account-wide. It covers your call assets, location assets and any call ads you still run.

How Google tracks the calls to your account

This is the part people ask about most. With call reporting on, Google puts a forwarding number in your ad, or swaps it in on your website for visitors who arrived from an ad. The caller dials that number, Google routes the call to your business line, and the call is recorded against the campaign and ad group it came from.

According to Google’s page on call reporting, you get the call’s start time, its duration, whether it connected and, for calls over 15 seconds, the caller’s number. The forwarding numbers belong to Google and can change or be reassigned, so never print one on a van or a business card.

Forwarding numbers are only available in certain countries. If yours is not on the list, skip to the last section and track calls with your own call tracking numbers.

Step 1: Create the phone call conversion action

Every call type starts the same way. From Google’s guide to setting up phone call conversions:

  1. Open Summary in the Goals menu.
  2. Select + Create conversion action.
  3. Tick the Conversions from phone calls box and select Save and continue.
  4. Choose a conversion category. For calls from ads, Google’s own steps pick Phone call lead.
  5. Select + Create conversion and choose Calls from ads, Calls from website or Calls via uploads.
  6. Select Save and continue, then follow the step for your call type below.

How to name the conversion action

  • Avoid names like Call, Phone, Lead or Conversion 1.
  • Use names that say what the conversion is: Qualified Call, Booked Appointment, New Customer.
  • This matters once you have several conversion actions for different call outcomes.

A new phone call conversion action shows Unverified or Inactive. Google says this is normal, and that the status changes to Active after the first real conversion or a successful test.

Step 2: Finish the setup for your call type

Calls from ads (call assets or call ads)

This counts calls made straight from the ad. Google’s requirements are short:

  • At least one call asset, or a location asset, with a verified phone number.
  • Call reporting turned on.
  • A phone number whose country code is on Google’s eligible list.

Choose Calls from ads in step 1, select Set up call from ads and then Finish. New calls are otherwise counted under Google’s default “Calls from ads” action, so creating your own lets you set the name, value and call length.

If you have not added a call asset yet, follow our guide to call assets, formerly call extensions. Call ads are on their way out: Google no longer lets you create them, and existing ones stop showing in February 2027. See what replaces call-only ads.

Calls to a phone number on your website

This counts calls from people who click your ad, land on your site and dial the number they see there. Google swaps your number for a forwarding number, the same idea as dynamic number insertion.

In step 1, choose Calls from website, then Someone calls a number shown on my website, and enter your number. Then, following Google’s website call setup:

  1. Set up the Google tag on your site.
  2. Next to Phone snippet, select Download snippet.
  3. Choose how to install it: yourself, by emailing it to your developer, or with Google Tag Manager.
  4. Select Send and continue, then Create and continue.

Details that break this setup

  • The number in the snippet must match the number on your page exactly, country code included.
  • The default tag tracks one number per page. Several numbers need the manual install.
  • In Google Tag Manager, the tag type is Google Ads Calls from Website Conversion. Google advises against the Tag Manager route if your site already uses DNI or third-party call tracking.
  • A number that changes through DNI cannot be verified by Google’s scan. Link Google Search Console to Google Ads, or place the Google tag directly in your HTML.

Clicks on a number on your mobile site

This counts taps on a phone number, button or link on your mobile site. Google is clear that it tracks the click only, not the call.

In step 1, choose Calls from website, then Someone makes a call by clicking a number on my website. Select Set up calls from website, set up your Google tag and event tag, and select Finish. Google’s page on phone number clicks explains that the event tag is a snippet with an onclick handler on the number.

Use it as a secondary signal. A tap can be cancelled before it rings, so it overstates real calls.

Import call conversions

Here you track calls in another system and tell Google which ones turned into something. Google’s steps for importing phone call conversions are:

  1. Create an import conversion action: from Goals, Conversions, Summary, select the plus button, then Import. Choose Manual import from API or upload, then Track conversions from calls.
  2. Note the conversion name exactly. Your file has to match it, capital letters included.
  3. Wait at least 4 hours before the first upload.
  4. Under Goals, open Conversions, then Uploads, select the plus button and View templates, and download the phone call template.
  5. Add one row per call: Caller’s Phone Number, Call Start Time and Conversion Name are required. Conversion time, value and currency are optional.
  6. Upload the file, or schedule it from Google Sheets, HTTPS or SFTP.

Choosing Calls via uploads in step 1 leads to the same template (Google notes that option is not offered in the Phone call lead category). Google matches each row to a call it already tracked on a forwarding number, so this method still needs call reporting. Imported conversions cannot be removed, so check the file first. Our guide to Google Ads offline conversions covers the click-based import that CRMs and call tracking tools use instead.

Step 3: Set the minimum call length

A call conversion from ads is counted by duration: you set a minimum length, and shorter calls are filtered out. A call has no minimum length to appear in your call reports, which is why you will usually see more calls than conversions.

Google Ads conversion action settings with the Call length field set to 60 seconds, above the conversion window and attribution settings

The screenshot shows the Call length field in the conversion action’s settings, set to 60 seconds in our account. Google’s help pages do not state a default, so open the setting and choose your own. Here is how a 60-second minimum treats five example calls:

The supplier call is the problem. Length filters out misdials, but it cannot tell a lead from a long call about something else.

Google has started to close that gap. With call recording on, its AI reviews the recording of a call from an ad and counts only calls it judges to be qualified leads. Recording is limited to calls where both numbers are in the US or Canada. Everywhere else, and whenever a call cannot be recorded, the call length you set decides.

Last setting: make the action primary if you want Smart Bidding to use it. Google’s call asset checklist gives the path: open the action from Goals, Conversions, Summary, select Edit settings, and choose Primary under action optimization. A secondary action is reported but not bid toward.

How to tell if your calls are being tracked

Do not trust a setup you have not tested. Google’s website call guide describes the test, and it costs you one click:

A few details from Google’s pages make the test easier:

  • Allow up to an hour after creating the conversion action before testing.
  • To repeat the test, delete the gwcc cookie first. It stores the forwarding number.
  • To see calls, open Campaigns, select the Columns icon and add the Call details columns: Phone impressions, Phone calls and Phone-through rate.
  • Tag Assistant confirms the tag fires. An “Inactive tag” status usually means the snippet is installed incorrectly.

If the number on your site does not change, the snippet is missing from that page or the number in it does not match the page.

How to send qualified calls instead of every call

Everything above counts calls by length, or by Google’s own judgment. To decide for yourself which calls count, track them in a call tracking tool and send only the qualified ones to Google Ads. This also works in countries without Google forwarding numbers.

With Nimbata’s Google Ads integration, the setup has three parts.

1. Connect Google Ads and attribute the calls

In Nimbata, open Integrations, then Google Ads, select Connect and sign in (setup guide). Nimbata’s DNI script saves the click ID from each visitor’s landing page, so a call carries its campaign, ad group and keyword. That is call attribution, and it is what lets a conversion be matched to a click. If calls arrive without it, check your GCLID tracking.

One tracking number is enough to count Google Ads calls. For keyword and session detail you need a pool, and its size depends on your traffic.

2. Create the conversion action from Nimbata

Creating a new Google Ads call conversion action from the Nimbata Google Ads integration

Select + Add conversion, pick the Google Ads account, then choose an existing conversion or create one from scratch. Nimbata creates the action in Google Ads for you. If you prefer to create it in Google Ads, set up an import conversion action there and select it in Nimbata.

3. Decide which calls qualify, then send them

A workflow checks each call when it ends and sends the conversion only if your conditions are met. You can qualify on:

The conversion workflow template builds this for you. Duration alone is a weak test of lead quality, so combine it with a tag or a question where you can.

Send a value with each conversion

A qualified call, a booked appointment and a new customer are not worth the same. Nimbata can send a value with each conversion: one your team enters, a fixed value set by a workflow rule, or one AI works out from the conversation.

These figures are examples. Base yours on what a lead is worth to your business. You can keep several conversion actions for reporting and make one of them primary, usually the qualified call or the booked appointment, so bidding follows the outcome you want from your PPC calls.

Troubleshooting a call conversion setup

Find where the data stops, then fix that step.

  • The conversion action stays Inactive. No conversion has reached it yet. Run the test above, or wait for the first qualifying call.
  • Calls show, conversions do not. The calls are shorter than your minimum call length, or the action is secondary and left out of the Conversions column.
  • The call is in Nimbata with no Google Ads attribution. Check that the DNI script is on the landing page and that the click ID survives redirects.
  • The workflow fired but Google Ads shows nothing. Check the account and conversion action it points to, using the conversion not found guide. Imported conversions take time to appear, so wait at least 12 hours.
  • Too many calls become conversions. Your rule is too broad. Add a tag or an outcome to the duration condition, and keep irrelevant clicks out of the campaign in the first place.

FAQ on call conversion tracking

What is a call conversion in Google Ads?

A call conversion is a Google Ads conversion that represents a valuable action generated through a phone call. Instead of treating every call as a conversion, you can define specific criteria that determine which calls should count.

What is the difference between a tracked call and a call conversion?

A tracked call is a phone interaction that has been captured and attributed to a marketing source. A call conversion is a tracked call that meets your definition of a valuable business outcome.

For example, you might track 100 calls but send only 30 qualified calls to Google Ads as conversions.

Should every phone call be counted as a conversion?

No. If your business receives spam calls, existing customers, short calls, or other irrelevant calls, counting all of them as conversions can make your conversion data less meaningful. Filtering calls based on quality or outcome can provide a stronger optimization signal.

Can I create a Google Ads conversion action from Nimbata?

Yes. After connecting your Google Ads account to Nimbata, you can use + Add conversion to select an existing conversion or create a new Google Ads conversion action directly from Nimbata.

Can I have multiple Google Ads call conversions?

Yes. You can create different conversion actions for different call outcomes, such as qualified calls, booked appointments, sales opportunities, and customers. Nimbata supports multiple conversion setups with different triggers and workflows.

Can I send call conversion values to Google Ads?

Yes. You can configure conversions to include a value and use Nimbata automation to determine when that value should be sent to Google Ads.

What should I use as my Google Ads call conversion?

Start with the business outcome that most reliably represents a valuable lead. For some businesses this may be a qualified call; for others, it may be a booked appointment or sales opportunity. If you have enough reliable conversion data, use the conversion that best represents the outcome you want Google Ads to optimize toward.

How does Nimbata send call conversions to Google Ads?

Nimbata connects to your Google Ads account and uses workflows to determine when a call meets your conversion criteria. When the conditions are satisfied, Nimbata sends the conversion to the selected Google Ads conversion action.

Why are my Google Ads call conversions showing as inactive?

A newly created conversion action may show as inactive until Google Ads receives conversion data for it. Once Nimbata starts sending matching conversions, the conversion can become active.

Can I use AI to determine whether a call is a conversion?

Yes. If you use Nimbata’s conversation intelligence capabilities, call content and AI-generated insights can be used as part of your call qualification logic. This can help identify outcomes and intent that simple rules such as call duration cannot capture.

If an advertiser uses Google's phone call conversion tracking feature, how are the calls tracked to their account?

Through Google forwarding numbers. With call reporting on, Google shows a forwarding number in your ad, or swaps it in on your website for visitors who clicked an ad. The call is routed to your business line and recorded against the campaign and ad group that produced it. A call that reaches the minimum length you set is counted as a conversion.

How can I tell if my calls are being tracked?

Check three things in Google Ads. The conversion action should show Active, which happens after the first real conversion or a successful test. The Call details columns should show phone impressions and phone calls for your campaigns. And when you click your own ad, the number on your website should change to a Google forwarding number.

Bottom line

Setting up call conversion tracking in Google Ads takes three steps: create the phone call conversion action, finish the setup for your call type, and set the minimum call length. Then test it with a real call before you let bidding use it.

Google’s own tracking counts calls by length, with AI lead qualification for recorded calls in the US and Canada. When you need your own definition of a good call, or a value on each one, qualify the calls in Nimbata and send only those. Google Ads then learns from the calls that matter to your business, and your call reports show which campaigns produced them.